Bonding Test를 실시하여 Sn-Pb Solder와 Pb-Free Solder 간의 차이를 확인하고 Pb-Free Solder중에서도 각 재료마다의 Mechanical Bonding Test를 실시하여 Bonding Force를 체크한다. 보통 Soldering 된 제품이 받는 Stress 는 Tensile Stress 보다는 Shear Stress 가 주요하기 때문에 Solder 선택 시에는 Solder의 Tensile Property 보다는 Shear Pr
Tensile properties
인장 강도의 측정은 재료에 인장응력을 가해 견디는 강도를 측정한 것이다. 인장응력은 온도의 영향을 많이 받기 때문에 실험은 모든 재료가 같은 온도 하에서 실시되어야 한다. 또한 극한 UTS 측정시에는 온도와 Strain rate를 함께 고려하여야 한다.
3. Shear properties
Shear Property인 Shear M
In describing the answer to the question below, try to share your opinions on the basis of evidences such as articles and books. Also provide information of the evidence (author, title, journal name, etc.).
1. Explain what happens in terms of mechanical/chemical properties when making products using metal-based 3D additive manufacturing technology. (10 points)mechanical properties
전통적
What is Amorphous metal?
Polycrystalline grains of varying shapes and sizes
Misaligned planes of atoms slip past each other easily, absorbing energy and allowing dislocations to move, making deformation permanent.
Grain boundaries represent weak spots
Also called Metallic glasses or glassy metals
Cooled faster than atoms can rearrange into a crystal.
Dislocation movement obstructed s
구조적 특징
이론적으로 인간이 만들어낸 물질 중 가장 강할 것으로 예상
그래핀을 원통형 구조로 변형시킨 탄소나노튜브의 경우 실험적 60 [GPa] 이상일 것으로 예상
뛰어난 탄성 변형률
뛰어난 전류 밀도
( 그래핀 : 200,000 [cm2/Vs] ]
[ 실리콘 : 1,420 [cm2/Vs] 이하 )
빠른 전자이동 속도 때
1 GPa
Elastic modulus Nanoindentation > 6 GPa
Adhesion Tape pull, modified-edge lift-off Delamination-free
Disavantages
Weakens mechanical properties
Lower thermal conductivity
Narrow pore distribution to ensure dielectric constant is homogeneous and isotropic
Pores need to be closed cells to prevent crack propagation and moisture absorption
Need to add silica to seal surface pores
2.4. Bonjean Curve
많은 학생들이 Bonjean Curve 에 대해 답을 하지 못하였다고 하셨다. 우리 조원들도 이 문제에 대해 거의 답을 하지 못하였다고 했다. Bonjean Curve는 부력의 개념이다.
그림 Bonjean Curve
임의의 수선에서 횡단면의 면적은 Simpson's 1st Rule 같은 방법으로 구할 수 있고 이를 수선변화에 따른 곡
1.Tiltle
Synthesis of PVAc and PVA
2.Objective
PVA(poly vinyl alcohol) is prepared by hydrolysis of PVAc, which is synthesized by emulsion polymerization of vinyl acetate.
3.Theory
◇ Background
-PVA
Polyvinyl alcohol has excellent film forming, emulsifying, and adhesive properties. It is also resistant to oil, grease and solvent. It is odorless and nontoxic. It has high tensile
Tensile
strength
(MPa)
Yield
strength
(MPa)
Elongation
(%)
Reduction
of Area
(%)
Hardness
(Hv)
M
SUH3
941
512
23.4
48.0
411
SUH35
1082
796
29.8
28.4
484
Table. 2 Material properties of base metals
(단위 : mm)
지름
D
표점거리
L
평행부길이
P
어개부의 반지름
R
12
50
약 60
15 이상
비고
1.이 시험편은 평행부를 기계